LUND Interceptor Instructions D'installation page 3

Installation Steps
Check position of hood shield. NOTE: Ensure that center flanges where tape will adhere are not in contact with top of grille.
9
Press and hold hood shield against the upper surface of hood.
10
Remove adhesive backing and apply (2) bump
12
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund
and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of
fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
ons to hood surface.
®
branded products offered by Lund International, Inc. We take the utmost pride in our products
800-241-7219 • Visit us at lundinternational.com
© 2012 Lund International, Inc. All rights reserved.
Lund and the Lund
® ®
Align front of shield with front edge of hood.
Grille
Remove remaining tape liner by pulling on the free ends. Apply
pressure to flange to ensure proper adhesion of tape.
11
Lund International
logo are trademarks of Lund International, Inc.
Page 3 of 3
Hood shield
Hood