Publicité
Les langues disponibles
Les langues disponibles
Before initial use
Check the oil level Y1 .
•
•
Check all screw connections for a tight fit.
•
Check the cutting blade screw and have an authorised workshop tighten it if necessary.
•
Check whether the safety control bar for the engine brake is working perfectly.
•
Check that all protective devices have been attached properly and are not damaged.
Before every operation
•
Check the lawn area and remove any objects.
•
Check the area of the boundary wires (if an auto mower is being used for lawn care).
Check the oil level Y1 .
•
•
Check the condition and firm fit of the blade, if necessary have an authorised workshop tighten the blade screw.
•
Check whether the safety control bar for the engine brake is working perfectly.
•
Check that all protective devices have been attached properly and are not damaged.
•
Check grass collecting equipment for wear or loss of functionality.
Every 10 operating hours
•
Check all screw connections for a tight fit.
•
Check the fan, blade coupling and fan housing regularly for wear and a tight fit.
After every operation
•
Clean the mower.
•
Check the blade for damage and wear.
Running-in time – after the first 5 operating hours
•
Change the engine oil Y1 .
Every 25 operating hours or every three months
•
Clean the air filter paper insert W .
Clean the spark plug and adjust electrode distance Y .
•
Every 50 operating hours or once a year
•
Change the engine oil Y1 .
•
Lubricate the wheel bearings.
During annual servicing
Have the air filter paper insert replaced W .
•
•
Have the spark plug replaced Y .
•
Clean the gearbox and the area under the belt cover.
•
Check the drive throttle cable and adjust it if necessary.
16 CARE AND SERVICING OF YOUR LAWNMOWER
Regular care is the best guarantee of long working life and trouble-free operation!
Only use original spare parts because only those guarantee safety and quality!
Cleaning (Illustration O )
IMPORTANT
When carrying out cleaning and maintenance work do place the mower on its left side (in the direction of travel), as
otherwise you may have difficulties starting it up again.
ATTENTION
When tilting or placing the mower on its side, ensure that no oil or fuel comes out of the machine. Fire hazard!
Remove dirt and grass residue immediately after finishing mowing. Use a brush or cloth to clean.
Do not turn the blade bar as this pumps motor oil into the carburettor/air filter and may cause trouble when trying to start up
again.
ATTENTION
Do not put your fingers into the openings of the fan housing and hold onto the fan. If the blade bar is rotated during
cleaning, there is a risk that your fingers may become caught between the fan and the fan housing!
IMPORTANT
Never use a pressure cleaner or ordinary water jet to clean the drive section, motor parts (like ignition system,
carburettor etc.), and bearings. Damages or expensive repairs can be the consequence of such action.
See table for explanation of symbols page 3
15
GB
Safety instruction!
Publicité
