Sharp MX-B350WE Guide De Démarrage page 6

If in doubt about disposal, contact your local authorities or
dealer and ask for the correct method of disposal.
ONLY FOR USERS IN THE EUROPEAN UNION, AND SOME
OTHER COUNTRIES; FOR INSTANCE NORWAY AND
SWITZERLAND: Your participation in separate collection is
requested by law.
The symbol shown above appears on electrical and electronic
equipment (or the packaging) to remind the users of this.
If the equipment has been used for BUSINESS PURPOSES,
please contact your SHARP dealer who will inform you about
take-back. You might be charged for the costs arising from
take-back. Small equipment (and small quantities) might be
taken back by your local collection facility. For Spain: Please
contact the established collection system or your local authority
for take-back of your used products.
Environmental information
Please read this part carefully. It will help you to reduce
your impact on the environment and help you to reduce
your costs at the same time.
Saving paper
1. The automated duplex printing function is for printing both
sides of paper automatically without turning over the paper
manually. If the machine is equipped with the automated
duplex printing function, set up your print settings on your
computer to automatically print double-sided. Please use
the automatic duplex printing function of this machine
wherever possible.
2. By printing on recycled paper and thin 64g/m
meet the standard EN12281:2002 and similar quality
standards, you can reduce the impact on the environment.
Saving energy
1. This machine has an energy save mode for reducing power
consumption largely. When the machine is not used for a
certain period of time, the machine switches to this less
power-consuming mode. In this mode, the power supplies
of the operation panel and fusing unit are shut off. Thus the
power consumption can be reduced. The recovery time
from this mode requires more time than from the "ready
mode". You can adjust the times the machine switches to
the energy save mode. For models with a power-save
button: If your next print would be later than the set time for
the energy save mode, we recommend to press the
power-save button to activate the power saving at once.
For models with automated power management function
that adjusts itself to the usage pattern of the device, or also
for models with eco scan mode, we recommend the use of
it in order to reduce the energy consumption and save
additional costs. These energy-saving functions are
described in detail in the operation manual.
2. This machine complies with the latest version of the
International Energy Star criteria. The "International Energy
Star Programme" is a voluntary registration scheme for
energy-saving office devices.
4
Cartridge disposal and treatment
Regarding your used Sharp toner cartridges and other
consumables from Sharp copiers/multifunctional machines,
please observe that these waste products shall be treated
properly according to the legal requirements in your area. We
recommend to contact competent service providers (e.g. waste
recycling companies) for this, and to ask local authorities for
support, when necessary. For information on existing Sharp
collection and recycling programs, which exist in some
countries, please see our website www.sharp.eu.
This product is designed for commercial application only and
as such it falls outside the scope of Regulation (EC)
1275/2008 implementing EU Directive 2005/32/EC on
eco-design requirements for standby and off mode electric
power consumption. Sharp does not recommend the product
for domestic application and will not accept any liability for
such use.
Noise Emission
The noise emission can be viewed at the following URL
address:
http://www.sharp-world.com/products/copier/products/
Safety data sheet
2
paper that
The SDS (Safety Data Sheet) can be viewed at the following
URL address:
http://www.sharp-world.com/corporate/eco/env-info/sds/us/index.html
SUPPLIES
Standard supplies for this product that can be replaced by the
user include paper and toner cartridges.
Be sure to use only SHARP-specified products for the toner
cartridges and transparency film.
GENUINE SUPPLIES
Storage of supplies
Proper storage
1. Store the supplies in a location that is:
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper
may curl or become damp, resulting in paper misfeeds.
For best copying results, be sure to use
only Sharp Genuine Supplies which are
designed, engineered, and tested to
maximize the life and performance of
Sharp products. Look for the Genuine
Supplies label on the toner package.
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.