Domo DO91124 Mode D'emploi page 32

Les langues disponibles

PARTS

Freezer compartment

Temperature control knob

Glass shelf

Vegetable drawer

Levelling feet

Door shelves

INSTALLATION

Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and the

inside with a wet, lukewarm cloth.

Select a place with a strong, level floor.

Allow 10 cm of space between the back of the refrigerator and any adjacent wall.

Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will

cause higher electricity consumption.

Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on the

evaporator, and your refrigerator.

Before connecting your refrigerator to the power supply, check that the voltage stated on the rating

label of your appliance corresponds to the voltage in your home. A different voltage could damage the

appliance.

After installation, leave the fridge for 24 hours before turning it on. This way the refrigerant can settle.

Allow the appliance to run empty for 8 hours so the compartment can cool to the appropriate

temperature.

For uneven surfaces, front feet can be aligned.

The climate class indicates the minimum and maximum ambient temperature for the proper operation

of an appliance. You can find the climate class on the type plate on the back of the appliance.

SN: Subnormal: ambient temperature between 10°C and 32°C

N: Normal: ambient temperature between 16°C and 32°C

ST: Subtropical: ambient temperature between 16°C and 38°C

T: Tropical: ambient temperature between 16°C and 43°C

DO91124

Lift

Lower