THOMSON THVC9312L Guide D'utilisation page 35

HOW TO ASSEMBLE THE ACCESSORIES
Accessories can be connected directly without the use of the tube
•
Insert the 2-in-1 brush or crevice nozzle in the engine block
housing.
The accessories are also interchangeable with the motorized
brush and can be connected at the end of the tube
•
Insert the round end of the 2-in-1 brush or the nozzle end for
baseboards into the bottom end of the tube.
Assembling the dust container
1. Place the cone into the dust container and match the cone
pins in the grooves inside the dust container.
2. Insert filter on the cone.
Assembling the dust container with the engine block
Place the dust container aligned with the connector of the
engine block.
EN-12