Publicité
Les langues disponibles
Les langues disponibles
REMOTE OPERATION
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V / 60Hz power outlet. Turn on the
power switch in the rear of the unit. Only operate heater in upright position with caster wheels attached.
When using remote control, please pull out the insulating film as shown below.
°C/°F button: Button for alternating between Fahrenheit and Celsius
ON/OFF button: Used for power-on or power-off
Temp up button: To increase set temperature
Temp down button: To decrease set temperature
Timer power button: for setting timer-power ON/OFF
Insulating Film
6
Battery Cover
Publicité
