Télécharger Imprimer la page

AEG FSE83800P Notice D'utilisation page 40

Masquer les pouces Voir aussi pour FSE83800P:

Publicité

Les langues disponibles

Les langues disponibles

40
www.aeg.com
CAUTION!
Water and salt can come out
of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.
8.2 How to fill the rinse aid
dispenser
9. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the
salt container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree
of soil.
9.1 Comfort Lift
CAUTION!
Do not sit on th e rack. Do
not put excessive pressure
on locked basket.
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse
3. Remove the spilled rinse aid with an
4. Close the lid. Make sure that the lid
A
B
C
The Comfort Lift mechanism allows to lift
the lower rack up (to the second rack
level) and down to load and unload
dishes easily.
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
aid reaches the marking ''MAX''.
absorbent cloth to prevent too much
foam.
locks into position.
Fill the rinse aid dispenser
when the indicator (A)
becomes clear.
If you use multi-tablets and
the drying performance is
satisfactory, the rinse aid
refill indication can be
disabled.
We recommend to always
use rinse aid for better
drying performance, also in
combination with multi-
tablets containing rinsing
agent.
CAUTION!
Do not exceed the max load
capacity (18 kg).
CAUTION!
Only use detergent
specifically designed for
dishwashers.
To ensure symmetric
unlocking on both sides, lift
the trigger handle
completely and the basket
slightly until the basket is
disengaged on both sides.

Publicité

loading