Wiring Diagram; Safety Distance From Flammable Materials - Ferroli CLIO ERMETICA Manuel D'installation, D'utilisation Et D'entretien

2.7 Wiring diagram

FUME FAN
ENCODER
AUGER
EXCHANGERS
FUME FAN VENTILATORE
FUMI
TSP= PELLET SAFETY THERMOSTAT
DEP = PRESSURE SWITCH
* = OPTIONAL COMPONENT
2.8 Emergency
Suitable fire-prevention devices should be arranged for any eventuality.
In case of a fire, proceed as follows:
- Immediately disconnect the plug.
- Extinguish the fire using suitable fire-extinguishers.
- Call the fire department immediately.
- Do not use jets of waters to extinguish the fire.
3 STOVE SAFETY

3.1 Safety distance from flammable materials

To prevent the risk of fire, stove positioning must respect a minimum distance from flammable materials, according
to that given in the technical table of the manual and on the dataplate.
Pay attention to the type of floor: for delicate and flammable materials it is advisable to use plates in steel or
toughened glass as a support base (see section 2 - Transport and Installation). In case of particularly fragile objects
such as furniture, curtains or sofas, increase the stove distance considerably.
EXTERNAL
THERMOSTAT*
FUME
PROBE
IGNITER
ROOM
PROBE*
GROUND
37
AIR FLOW METER
CLIO ERMETICA