JAC DURO Serie Notice D'instructions Originale page 8

Daily, by a trained user :
1. Empty the crumb collector ;
2. Use a slightly damp cloth for external maintenance ;
3. Open the table in front to clean on the inside.
Every 25.000 cuts and/or at least 1 time a year, by an authorised agent :
1. Remove the plug ;
2. Replace the cutters (see cutter changing procedure) ;
NB : Don't over tighten the cutters because there is a risk of deforming the frame.
3. Clean with a brush and vacuum the inside of the machine ;
4. Check the state of the bearings ;
5. Lubricate the guides.
Check that your authorised agent records the intervention in your service book in
Complement the maintenance for models with lubrication
The oil to use is :
Every 1000 cuts or every 15 days, by a trained user :
1. Add the necessary dose of edible oil (100 to 150 ml) necessary to imbibe trolley felt ;
2. Check the tank (optional) oil level.
Every 25.000 cuts and/or at least 1 time a year, by an authorised agent :
1. Remove the plug ;
2. Replace the felts of the pusher
MAINTENANCE
order to keep your 3 year warranty
7940019 (as mentioned in the JAC "spare parts" catalogue)
Or food liquid vegetable oil with natural antioxidant
8