Publicité
Les langues disponibles
Les langues disponibles
Glass shelves
Bottle rack *
Vegetable drawer with automatic humidity control
•
The drawer at the bottom of the refrigerator is intended for storing fruit and vegetables. It provides
humidity and prevents the food from drying out.
•
The humidity in the drawer is regulated automatically, depending on the type and amount of
inserted food.
Description of the appliance
The shelves are made from safety glass. To change the height of a
shelf, lift the front of the shelf (1). Take hold of the back and pull the
shelf slightly forwards (2). Move the shelf to a higher or lower position
(3).
To remove a shelf from the refrigerator, lift the front of the shelf (4). Take
hold of the back and pull the shelf out of the appliance (5).
The bottle rack can contain a maximum load of nine 0.75-litre bottles
or 13 kilograms of total weight. Also cans can be put on the bottle rack
(lengthwise or crosswise). Make sure that the door can close correctly
if you have put bottles or cans on the rack.
The bottle rack cannot accidentally being pulled out. It can only be
pulled out when it is empty. To pull it out, lift it slightly at the front (1)
and pull it towards you (2).
To remove a drawer, pull out the drawer as far as it will go (1). Then, lift
the front part (2) and pull it out completely.
To insert a drawer, follow the reverse order (3 and 4).
15
Publicité
