Publicité
Les langues disponibles
Les langues disponibles
• The LED indicators will display the
remaining charge in the power bank during
discharging.
Check power status
• Click once on the POWER button and the
LED indicators will light up and indicate the
remaining power status.
• If the USB cable is not disconnected while
the charging process finishes, push the
POWER button first to restart the charging.
Small current supply mode
• Press the POWER button for 8 seconds when
your device is being charged.
• The function is mainly used to charge
certain wearable electronic devices. When
charging a device that needs a charging
current less than 100mA via a USB-A port,
this mode should be activated. You can
press the button for 3 seconds to exit this
mode, it also automatically closes after 2
hours.
7
Publicité
