Lea LE24100DP Mode D'emploi page 15

Do not use the power tool if the switch cannot turn it on and off. A power tool with a
broken switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 ADDITIONAL SAFETY RULES FOR GRASS TRIMMERS
Grass trimmers must not be used by children or untrained persons.
Wear stout shoes or boots to protect your feet.
Wear long trousers to protect your legs.
Check the appliance before use. If it is damaged, it must not be used.
If the unit is damaged, have the damage repaired by an authorized repair agent.
Do not use the appliance if the mains cable is damaged or worn.
Before use check the extension cord for possible wear and tear. In case of damage,
immediately remove the mains cable from the wall socket. Do not touch the cable before
the mains cable has been removed from the wall socket.
Do not use the appliance in the presence of children and/or animals.
Only use the appliance in daylight or with good lighting.
Never use the appliance without the guard in place.
Before using the appliance, remove sticks, stones, wire and other obstacles from the
surface on which you intend to work.
Only use the appliance in an upright position, with the cutting line pointing to the ground.
Never switch on the appliance in another position.
Always keep your hands and feet away from the cutting line.
Avoid touching the cutting line.
Make sure that the mains cable does not touch the cutting line.
Before putting the appliance down, switch it off and wait for the cutting line to come to a
complete standstill. Never attempt to bring the cutting line to a standstill yourself.
12