EINHELL MSK 3000 Split Mode D'emploi page 15

Anleitung MSK 3000 Split,5spr. 30.10.2001 7:16 Uhr Seite 15
GB
Cleaning the air filter
After removing the air filter you can clean it carefully
with a vacuum cleaner. Heavily soiled filters should
be carefully rinsed in warm water. Do not use hot
water under any circumstances.
Cleaning the housing
It is best to clean the housing with a soft cloth. Never
use aggressive detergents, petrol, chemically treated
cloths or solvent as they may damage the housing.
Troubleshooting
The air conditioner fails to start.
Check whether the power plug is fully inserted.
Is there any electric current?
Is there a power failure?
Is the red lamp of the water level indicator on? If it is,
check whether the tank is full and needs to be
emptied or whether it is correctly inserted.
Is the room temperature below 0°C?
The air conditioner appears to make no impact.
Is the filter dirty or is the air outlet blocked?
The appliance appears to make very little impact.
Are too many doors and windows open?
Is there anything in the room producing a great deal
of humidity?
The fan does not appear to run.
Is the filter heavily soiled and blocking the fan's
operation?
The appliance is very loud.
Is the appliance vibrating because it is tilted or not
standing squarely?
Is the floor uneven?
15