Publicité
Les langues disponibles
Les langues disponibles
13. LIGHT BULBS
This range hood uses 50W halogen lamps. (120V, 50W, PAR 20)
Install the lamps by rotating them clockwise into their socket holder.
14. HEAT LAMPS
The heat lamps required are 120V, 175W max, infrared bulbs. (120V, IR 175W, PAR 38)
You can use white halogen lights if warming shelves are not used. (120V, 90W, PAR 38)
Install the lamps by rotating them clockwise into their socket holder.
15. INSTALL FILTERS
It is recommended to install side filters first and finish with center one(s).
1.
Insert upper end of filter into the hood (tab end).
2.
Raise lower end toward the inside of hood.
3.
Position lower end of filter into channel and pull.
4.
While pulling the filter, slide it under the inner retaining piece.
Baffle filters are available as an option (see instruction sheet included with baffle filters).
HD0009
16. USE AND CARE
Grease filters and impeller(s).
The grease filters, impeller(s) and grease rail should be cleaned frequently. Use a warm detergent
solution. Grease filters and impeller are dishwasher safe.
Remove filters by pushing filters towards the back of hood and rotating filters downward.
All manuals and user guides at all-guides.com
HD0010
- 10 -
Publicité
