Publicité
Les langues disponibles
Les langues disponibles
EN
3. Test the PIR motion detector
Press the test button at the back. It switches to the testing mode
and sustains for 3 minutes. Walk in the detection scope and observe
the LED. When body movement is detected, the LED flashes once.
4. Adjust the angle
Adjust the bracket angle to achieve the best detection effect.
Side View
All manuals and user guides at all-guides.com
Top View
Installation Notices
Pay attention to the following during installation:
1. Mount the detector to a
location close to the entry or
exit
The detector aims at
preventing intrusion. Detecting
human movement at the entry
or exit is critical for security.
2. Mount the detector in a proper angle
The installation angle affects sensitivity
directly. The sensitivity is optimal when
the walk direction is vertical to the
infrared direction. Choose the best
location and angle according to the
actual situation and detection scope
diagram.
EN
Publicité
