Publicité
Les langues disponibles
Les langues disponibles
EN
Power Saving Mode
The product features power-saving design. If the detector detects
human movement twice in 3 minutes, it will switch to the sleeping
state to save power. At this time, the LED will not flash and no alarm.
After no movement within the next 3 minutes, the detector switches
back to the working state automatically.
Case 1:
Initial start and then arm.
Sleep after detecting human movement twice
Note:
After the detector is in the sleeping state, ensure no human movement
within 3 minutes: otherwise, the detector remains sleeping.
In the sleeping state, it is recommended that you leave the room after arming
the system. Ensure no human movement in 3 minutes. Then, go into the room,
the system alarms immediately.
All manuals and user guides at all-guides.com
Case 2:
Press the test button and then arm.
3 minutes later
No human movement
within 3 minutes
Switch from sleep to arm.
Installation
After making sure the detector works normally, do as follows:
1. Choose a suitable
installation location
Choose a suitable
installation location. It is
recommended to mount it
at the height of 2 m from
the ground.
2. Fix the detector
Fix the bracket on the wall with screws and attach the detector to
the bracket. Or user can stick it at the corner with double-sided
tapes.
EN
2.2-2.5 m
Ground
Publicité
