Smanos MD2300 Mode D'emploi page 4

EN
Detection Range
Top View
Connect the PIR Motion Detector
Connecting PIR motion detector is to build a wireless connection
between the detector and the control panel.
1. Control panel enters into the connecting state (For details, please
refer to the relative user manual).
2. Press the test button on the back of the detector twice, and the
control panel beeps once, indicating a successful connection.
All manuals and user guides at all-guides.com
0m 2m 4m 6m
2m
0m
Side View
8m
Note: If the control panel beeps twice when the above operation is done, it
means the detector has been connected before.
Working Mode
Testing Mode
After self-testing, press the test button, the detector enters into the
testing mode and detects once every 10 seconds. After 3 minutes,
the LED indicator flashes twice, and the detector switches to power
saving mode.
EN