Publicité
Les langues disponibles
Les langues disponibles
EN
Introduction
With digital dual-core fuzzy logic control processing technology
and intelligent analysis algorithm, the detector can detect infrared
rays released from human body. Featuring automatic temperature
compensation and resistance to airflow technology, it can identify
interfering signals and human movement signals, thus preventing
false alarm. Being able to detect human movement within 8-meter
cone space, it is suitable for applications in halls, hallways, etc. Its
low power feedback function enables users to get the SMS alert
about low battery when it is connected to GSM alarm system.
Overview
Detection
Lens
LED
Indicator
All manuals and user guides at all-guides.com
Test Button
Double-sided
Tape Stick
Place
Bracket Slot
LED Indication
Flash continuously: Self-testing.
Flash once: Intrusion is detected.
Flash twice: 3 minutes testing mode is finished, enters into power
saving mode.
Flash once per 3 seconds: Low battery indication. Users will receive
SMS notification if detector was connected with panel. Please
change the batteries immediately.
PCB Layout
Tamper Switch
Infrared sensor:
It detects the infrared rays released by human body
motion. Please do not touch the surface and always keep it clean.
Tamper switch:
Once the case is opened in work mode, the tamper
switch is triggered and then generates an alarm signal.
EN
Infrared Sensor
LED Indicator
Publicité
