Intellinet Network Solutions 522595 Mode D'emploi page 2

Fast Ethernet Office Switch • User Manual
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
Ethernet Office Switch, Model 522595. For specifications, go to
www.intellinet-network.com.
CONNECTIONS
Plug the female end of the power adapter
firmly into the IN jack and the other end into
an electrical outlet. Confirm that the power
LED is lit. NOTE: To ensure proper operation,
use only the included power adapter.
• 10/100 auto sensing ports automatically
detect optimal network speeds; supports
any combination of 10 Mbps or 100 Mbps network devices with full/
half-duplex operation.
• All ports on the switch support Auto-MDI/MDI-X functionality, so
crossover cables and uplink ports are not needed for connections to
PCs, routers, hubs, other switches, etc.
Cat5/5e UTP/STP cables provide optimal
performance; if a status LED doesn't
indicate a link or activity, check the
corresponding device for proper setup and
operation.
LEDs
LED Status
POWER On
Off
10/100M On
Off
LINK/ACT On
Blinking
Off
2
ENGLISH
All manuals and user guides at all-guides.com
Operation
Power on
Check connection
100 Mbps connection
10 Mbps connection
Valid port connection
Data transmitted/received
No link established
English
Fast
™