Muskoka Mumford MTVSC2594SCH Manuel D'instructions page 5

6. place back panels M and N with the finished side facing into the
mantel. Insert and tighten 14 screws (f) into the upper back panel
M to attach it to the mantel securely. Insert and tighten 20 screws (f)
into the back panels N to attach them to the mantel securely.
7. Insert 8 mounting pegs (c) into the storage areas of your mantel.
Line up and place the shelves (O) onto the mounting pegs (c).
8. Line up and insert 2 door hinges (g) into the recessions in doors p
and Q. Insert and tighten 8 screws (d) to attach the hinges (g) to
doors p and Q. Line up and insert the other end of the door
hinges (g) into the recessions in panels F and G of the assembled
mantel. Insert and tighten 8 screws (d) to attach the doors to the
mantel.
N
Hardware Used
f 12mm Screw
FLAT HEAD SCREW
FF
(3*12mm)
O
Hardware Used
c Mounting peg
CC
MOUNTING PEG
P
Hardware Used
d 15mm Screw
g Door Hinge
FLAT HEAD SCREW
DD
(4*15mm)
GG
HINGE
FIG 6
M
N
FIG 7
x 34
O
x 8
FIG 8
X8
Q
x 16
x 4