Publicité
Les langues disponibles
Les langues disponibles
DOCKING THE GUN
A retractable swivel arm with locating aperture is placed on the side of the turbine. The gun can be
conveniently placed in this docking area with or without the air hose attached.
This makes for handy storage of the gun when in use or not.
SPRAYING WITH PRESSURISED PAINT CONTAINERS
Using a pressurised paint container with your Pro-8™ spray gun is very easy. All you need is the
converter 3/8" H/BARB - GUN TO P/POT (PACC74). This connector allows you to connect directly
to the pressurised paint container via the tube.-
1.
Outlet
fitting
Follow these steps to convert your Pro-8™ spray gun:
1. Disconnect the air feed tube from the side of the spray gun.
2. Remove the outlet fitting and install the blanking nut (P0062) that comes with PACC74
– 3/8" Convertor.
3. Connect the paint tube.
NOTE: Converter (PACC74) is not recommended for use with gravity version.
All manuals and user guides at all-guides.com
2.
⁄
" H/BARB
3
8
11
3.
Blanking
Nut
Tube
Publicité
