Inserting/Replacing The Battery; Cleaning And Maintenance - EuroLite LED T500 RGB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Inserting/Replacing the battery

Open the battery cover on the rear of the remote control and remove it.
If replacing the battery, remove the old battery from the battery compartment.
Leaky or damaged batteries might cause cauterisation when in contact with the skin; therefore, use suitable
protective gloves.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty battery in accordance with the instructions of the manufacturer.
Insert the battery and make sure that the poles are correct.
Replace the battery cover and close it.
If the device will not be used for a longer period of time, remove the battery in order to avoid battery leakage.
In order to have a long battery life, you should only use alcaline batteries.
Batteries are hazardous waste and should not be disposed of with regular domestic waste!
Please take old and used batteries to a collection center near you.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
Danger of explosion when battery is replaced improperly.
BATTERY DISPOSAL NOTICE
Please dispose of old and used batteries properly.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Caution!
20/37
00028142.DOC, Version 1.4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Led t1000 rgbLed t1000

Table des Matières