GB
ATTENTION:
The shelf can only be mounted onto a shower enclosures equipped with a
Shelf A
1) Using an M 4x16 screw, connect the long rod with the B mounting clip.
2) Then use another two M 4x16 screws and the A mounting clip to attach the complex to the short brace.
3) Before you tighten the screws, control the position of the rod in accord with position of the shelf and make sure it
fits equally snug to the glass as to the wall.
4) Attach the B washer, the shelf and the A washer on the long rod with the final M 4x16 screw.
A
Shelf B
1) Using an M 4x16 screw, connect the long rod with the B mounting clip.
2) Then use another two M 4x16 screws and the A mounting clip to attach the complex to the short brace.
3) Before you tighten the screws, control the position of the rod in accord with position of the shelf and make sure it
fits equally snug to the glass as to the wall.
4) Attach the two B washers and the shelf to the long rod with the M 4x30 setting screw.
5) Mount the remaining B washer, the shelf and the A washer onto the short rod using the M 4x16 screw.
B
Disposing of the packing materials and of the product after its lifetime:
Any further useful packing materials (e.g. cardboard, building paper, or PE foil) you can use or recycle.
Packing materials you have no use for must be disposed of only in a safe way according to valid law norms of each
country.
After the lifetime of the product has expired, please give all the useful parts (e.g. metal) for further use or for recycling
as usual according to the law norms of the country.
MAINTENANCE
- Clean the plastic parts with a cloth and mild detergent. Never use any abrasive pastes, dissolvents, acetone or detergents and
desinfectants, that contain chlorine. The manufacturer accepts no liability for any type of use or care other than those contained in
these instructions. The manufacturer reserves the right to introduce technical changes without notice. The guarantee is 24 months
from the date of sale. For further information about assembly, use, and care contact your local dealer.
The manufacturer recommends the
debris from glass surfaces, shower frames, enamel and acrylic bathtubs, washbasins and water taps;
a special preparation with considerable anti-bacterial and anti-fungal effects.
Ecologically dispose of the packaging materials and after the service life of the radiator is finished, properly dispose of the radiator
as well. The reusable parts of the packaging materials such as the carton, tape and PE foil can be reused again instead of recycling
them. The non-recyclable parts of the packaging and later, the radiator itself should be disposed of in a safe and proper manner
according to law. Recycle the metal parts of the radiator by taking it to the proper recycling area.
RAVAK a.s., Obecnická 285, 261 01 Pøíbram 1, ÈR tel.: 318 427 111, 318 427 200
fax: 318 427 269, 318 427 278, e-mail: smith@ravak.cz www.ravak.com
GLASSLINE SHELF FOR SHOWER ENCLOSURES
INSTALLATION INSTRUCTIONS
RAVAK ANTICALC
line of products:
RAVAK CLEANER
The A package contains:
A - W
asher
A
B - W
asher
B
C -
Shelf
D -
4x16
M
screw
E -
M
4x30
setting screw
F -
Long rod
G - Short
rod
H -
Mounting clip
A
I -
Mounting clip
B
The B package contains:
A - W
asher
A
B - W
asher
B
C -
Shelf
D -
M
4x16
screw
E -
M
4x30
setting screw
F -
Long rod
G - Short
rod
H -
Mounting clip
A
I -
Mounting clip
B
- works to remove old and dried-on
RAVAK DISINFECTANT
short brace
.
1
pc
1
pc
1
pc
4
pcs
-
pc
1
pc
-
pc
1
pc
1
pc
1 pc
3
pcs
2
pc
4
pcs
1
pc
1
pc
1
pc
1
pc
1
pc
- is