Viking MF 860 Entretien Et Maintenance page 4

Konformit t_MF8.qxd
EN
Notes on maintenance and care
Important information on maintenance
and care of the product group
Ride-on mowers
Please always observe the following
important information for the prevention of
damage or excessive wear to your VIKING
appliance:
1. Wearing parts
Some parts of the VIKING appliance are
subject to normal wear even when used
properly and must be replaced in due time
depending on type and duration of use.
These include:
- Blades
- V-belt
- Starter battery
- Tyres, rollers
2. Observance of the information in this
instruction manual
The VIKING appliance must be used,
maintained and stored with the care des-
cribed in this instruction manual. Any
damage caused by non-observance of the
safety, operating and maintenance instruc-
tions are the sole responsibility of the user.
This applies in particular to:
- use of operating agents not approved
by VIKING (lubricants, petrol and engi-
ne oil, see engine manufacturer's speci-
fications)
- improper use of the product
08.11.02 11:12 Seite 4
All manuals and user guides at all-guides.com
- product modifications not approved by
VIKING
- use of attaching parts, attachments or
cutting tools not approved by VIKING
(see VIKING sale documents)
- use of the product for sporting or com-
petitive events
- resultant damage due to continued use
of the product with defective compo-
nents
3. Maintenance operations
All work listed in the section "Maintenance"
must be performed regularly. If this mainte-
nance work cannot be carried out by the
user himself, an authorised specialist dea-
ler must be commissioned to do it. If these
operations are neglected, faults may arise
which are the responsibility of the user.
These include:
- corrosive and other resultant damage
caused by incorrect storage
- damage and resultant damage due to
the use of spare parts which are not ori-
ginal VIKING parts
- damage due to maintenance and repair
work not carried out in the workshops of
authorised specialists' workshops.