Hisense HS212F Manuel De L'utilisateur page 10

Connect to COAXIAL Socket
• You can use the COAXIAL cable to connect
the TV's COAXIAL OUT socket and COAXIAL
socket on the unit.
Tip: The unit may not be able to decode all digital
EN
audio formats from the input source. In this case,
the unit will mute. This is NOT a defect. Ensure
that the audio setting of the input source (e.g. TV,
game console, DVD player, etc.) is set to PCM or
Dolby Digital (Refer to the user manual of the
input source device for its audio setting details)
with HDMI / OPTICAl / COAXIAL input.
Connect Power
Risk of product damage!
- Ensure that the power supply voltage
corresponds to the voltage printed on the
back or the underside of the unit.
- Before connecting the AC power cord,
ensure you have completed all other
connections.
Subwoofer
• Connect the mains cable to the AC IN Socket
of the subwoofer and then into a mains
socket.
Soundbar
Connect the mains cable to the AC IN Socket
•
of main unit and then into a mains socket.
Pair up with the subwoofer
Automatic pairing
Plug the soundbar and the subwoofer into the
mains sockets and then press
remote control to switch the unit to ON mode.
The subwoofer and soundbar will automatically
pair.
• When the subwoofer is pairing with the
• When the subwoofer is paired with the main
unit, the Pair Indicator will light up.
NOTE:
- Do not press the
except for manual pairing.
All manuals and user guides at all-guides.com
on the unit or
button on the subwoofer
- I f the automatic pair ing fails, pair the
subwoofer with the main unit manually.
Manual pairing
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1 Unplug both units from the mains sockets
again, then plug them in again after 3 minutes.
- Then press on the unit or remote control to
switch the unit ON.
- Press and hold the
soundbar or on the remote control for 3 seconds.
10
button on the