Publicité
Les langues disponibles
Les langues disponibles
Figure 35 RS485 pin on inverter
CONNECTION STEPS:
(1) Connect the communication connector configured for the inverter to the RS485
terminal of the inverter, as shown in Fig 37;
(2) According to the table of Optional communication accessories, connect the communica-
tion connector pinout and the user's device, make sure the connection is correct.
(3) Please download the monitoring software "WinExpert" and its operation instruction from
our website.
OPTIONAL COMMUNICATION
The optional communication modes include Ethernet and WIFI, which also need correspond-
ing communication parts and components as shown in Table below All operation parameters
of the inverter are output from port "RS485-M" to the communication devices, finally
transmitted to the monitoring system as standard Ethernet and WIFI signal.
Table of Optional communication accessories
Optional accessories
Ethernet convert
WiFi converter
GPRS converter
ENET converter
Please download the connection instruction, operation manual and commissioning
tools on website.
Note: the optional accessories are not standard-configured, need to buy separately.
Figure 37 Detailed connectiona
Inverter port
RS485-M
RS485-M
RS485-M
RS485-M
4
3
2
Figure 36 Communication connector
Port of upper PC
RJ45 pin
WiFi signal
GPRS signal
Ethernet port
1
Publicité
