LEXIBOOK Star Wars BT2000SW Mode D'emploi page 23

Programming FM radio presets
1. Press and hold "LED/SCAN" button on the remote (10) to search and save
stations in the memory (up to 20 stations). "P01" will blink, then the preset station
frequency number will be displayed.
2. To play the preset Radio Stations, press the "CH-" (11) or "CH+" (12) buttons
on the remote.
SYMPTOM
No power.
No sound.
Sound distortion
Bluetooth
failure.
Power Supply
Speaker Units
Power output
Bluetooth®
Effective distance
Working temperature
LED display
BT2000SW_IM1225_V05.indb 23
All manuals and user guides at all-guides.com
TROUBLESHOOTING GUIDE
SOLUTION
Make sure AC power plug is connected to the wall
socket outlet properly and it has power.
Check that the volume control is NOT at minimum.
Check that it is NOT set to mute.
Make sure that the correct mode has been selected.
Press POWER/SOURCE button repeatedly until
desired mode is reached.
Make sure the sound volume is not too high. Press
VOL- button to reduce the volume.
®
reception Make sure the external device is not too far from the
Bluetooth
Make sure both player and tower are set on
Bluetooth
SPECIFICATIONS
AC 110-240V~50/60Hz
2 x 3.5" main speakers
1 x 4" sub-woofer speaker
2 x 15W + 1 x 30W, 60RMS
2.1 EDR
within 10 meters
0°~ +40°
2 x LED lamps
®
tower.
®
mode.
23
28/05/2015 17:34