Marathon CL030053BK Manuel D'utilisation

Analog Alarm Clock with
Auto Ambient Light Display
Model:
CL030053BK
CL030053WH
CL030053BL
CL030053SV
CL030053GD
Thank you for purchasing this Analog Desk Alarm Clock with
Auto-Night Light. The utmost care has gone into the design
and manufacture of your clock. Please read the instructions
carefully and keep this manual for future reference.
MAIN FEATURES
- Alarm and snooze function
- Backlight and night-light function
FUNCTION KEYS
1. [ SNOOZE/LIGHT ] key:
- Press to turn on backlight for 3 seconds.
When the alarm is sounding, press to enter snooze
mode for 4 minutes.
2. [ ALARM ON/OFF ] key:
- Press to turn on or turn off the alarm.
3. Night light sensor
C1122C_CL030053 Manual A4_01.27.2016.indd 1
All manuals and user guides at all-guides.com
4. [ NIGHT LIGHT ON/OFF ] switch:
5. [ SET ALARM ] knob:
DISPLAY
1. Hour hand
2. Alarm hand
3. Second hand
4. Minute hand
5. Dial
GETTING STARTED
- Remove the battery door of the unit.
- Insert 2 new AA size batteries according to the polarity
- Replace the battery door.
OPERATION
(1) MANUAL TIME SETTING
After inserting batteries, you can set the time manually.
- Pull the [ SET ALARM ] knob out of the hole.
- Turn the [ SET ALARM ] knob counterclockwise to enter
(2) ALARM TIME SETTING
Turn the [ SET ALARM ] knob counterclockwise (refer to
diagram below) to set the desired alarm time.
1
- Slide to the < ON > position to activate night light function.
- When switch is in the < ON > position, the backlight will
automatically turn on in dim & dark environments as
detected by the light sensor.
- The brightness of the night light is dimmer than the normal
backlight.
- Slide to the < OFF > position to turn off the night light
function.
- Adjust to set the alarm time.
1
2
3
marks in the battery compartment.
time setting mode.
MANUAL ENGLISH
4
5
2016-02-01 1:51 PM