Midland M-5 Mode D'emploi page 19

All manuals and user guides at all-guides.com
Operation
Power on/off
Keep pressed for 1 second the MUTE/POWER button to turn on/off M-5.
The display will show for 1 second the opearating band.
Volume control
Press SQ/VOL+ o SQ/VOL- to adjust the volume; you can choose amongst 10
levels: from 0 to 9 (max level).
Channel selection
Press the UP/DOWN controls on the mike to scroll through the channels and se-
lect the desired one.
Keep pressed UP/DOWN for a quick scroll of the channels.
Squelch level control (28 levels)
Shortly press SQ, the display will show SQ and the current squelch level.
01 Squelch off
02 Lowest squelch level
28 Highest squelch level
To change the squelch level shortly press SQ- or SQ+ on the mike and select the
desired level.
Note: a high squelch level requires a stronger signal to open the speaker audio and to
listen to the other part.
"DS" Digital Squelch selection (5 levels)
Hold down the SQ control till ASQ appears on the right side of the display.
01 Lowest ASQ level
05 Max ASQ level
When ASQ is displayed, it is possible to change the level by pressing SQ and then
using SQ- or SQ+.
Note: a high ASQ level requires a stronger signal to open the speaker audio and to listen
to the other part.
AM/FM
Shortly press A/F to switch between AM or FM mode.
The LCD will show the selected mode.
If you operate in operating bands with FM modulation only, the pressure of the A/F
key recalls the latest channel in use.
| 7
M-5 Instruction Guide