Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Installation
Find the proper position to install the device without interfering with safety while
operating with your vehicle.
Thanks to the 12V socket, the installation of the radio is extremely quick and im-
mediate; it can only be placed in small places, also not in sight, having all operating
keys on the microphone.
Power supply
Connect the cigarette lighter power cable to the proper plug of your vehicle. Be
sure your car has a power supply of 12V and not 24V.
Installing an antenna
Connect the CB antenna to the ANT socket on the back of M-5. The antenna must
be tuned to the CB radio band (27 MHz). To verify the proper functioning of the
antenna, use a SWR meter.
For a good radio range, the SWR should not exceed a value of 2. A high SWR value
points out a defect in the antenna system, cable or a shourt circuit in the antenna
line. Never transmit without a connected antenna!
Note: The radio antenna is to be mounted as far as possible from other antennas, metal-
lic objects and interferences sources. CB antennas must be usually mounted in the vehi-
cle highest part on a metal surface. A sufficiently large metallic surface is essential for
the proper functioning of the antenna. For installation on fiberglass cabs or plastic wind
defectors, it is possible to use special antennas that do not require a metallic ground.
6 |
M-5 Instruction Guide
Publicité
