Care Instructions - Steinbach Speed Clean Classic 300 Mode D'emploi

EN
300/310/400_040300/040310/040340_v1901
the tension on the spring and internal valve components.
Changing the filter sand
The filter sand should be changed every 2-3 years, depending on how
much the filter system is operated.

Care instructions

Visible contaminants are removed through the filtration system. This
is not true for algae, bacteria and other microorganisms, which are
also a constant threat to clear, clean and healthy pool water. For their
prevention or removal, special water treatment is available, properly and
permanently dosed, guarantee for swimmers any kind of harassment
and ensure proper hygienic bath water.
Cleaning
Use conventional cleaning products. Do not use solvent-based or abra-
sive cleaning agents/tools, i.e. no hard sponges, brushes etc..
Storage
The product must be thoroughly dried after cleaning. After which, it is to
be stored in a dry location protected from frost.
Disposal
Disposing of packaging: The packaging material has been selected
in view of environmental concerns and disposability and is therefore
recyclable. The paper and cardboard can be recycled, as can the plastic
coverings.
Disposing of the product: Applicable in the European Union and
other European states with systems in place for collecting and sorting
recyclable materials. Dispose of the product in accordance with any
laws and regulations applicable at your place of residence.
Warranty conditions
The respective country's legal provisions for warranty conditions shall
apply accordingly. For Austria and Germany, these apply for 2 years
after the date of invoice.
12