Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
device trips after 8 minutes.
The light (F) flashes to indicate auto-off. To begin ironing again,
shake the iron slightly forwards until the light (F) comes on
steadily.
AFTeR IROnInG
To extend the working life of the iron, whenever you finish
ironing, you are recommended to empty the tank as follows:
• Unplug the iron from the outlet.
• Empty the iron by holding it tip downwards and shaking it
gently over a basin or sink.
• To dry residual moisture, turn the iron on again with the
thermostat at maximum for about 2 minutes.
• Unplug the iron from the outlet and allow to cool.
• Clean the plate with a dry cloth as traces of moisture could
mark it.
• Wind the power cable.
• Store the iron in an upright position.
Cleaning and maintenance
After use, always wait until the iron is cold before putting away.
Leave to cool in an upright position.
• Keep the surface of the plate clean.
• Clean the plate with a damp cloth only, never use abrasives
or solvents.
• Do not rest or use the iron on zips, hooks, rings etc. to avoid
scratching the soleplate.
Limescale prevention
The resin filter installed in the tank filters impurities, thus
ensuring constant steam delivery during ironing.
The resin softens the water and improves the long term
performance of the iron.
and SeLF CLeAn
12
Publicité
