Uline H-9527 Instructions D'installation page 3

The surface of the mop basin may be cleaned with a
mild soap solution in warm water using a soft cloth.
NOTE: When using a cleaning product,
carefully read the label to ensure that the
cleaner is safe for use on the basin (made of
Durastone structural fiberglass). Stains can be
cleaned using a mild detergent.
PAGE 3 OF 9
MAINTENANCE
CAUTION! Do not allow cleaners to sit or soak
on the surface of the basin. Wipe surface clean
and rinse completely with water immediately
after applying cleaner. Rinse and dry any
overspray on nearby surfaces. Never use
abrasive scouring powder or steel wool pads as
they will scratch the surface.
A periodic coating of high quality marine or automotive
polish will help protect the finish.
1-800-295-5510
uline.com
0721 IH-9527