Publicité
Les langues disponibles
Les langues disponibles
9. Blade Assembly.
WARNING: To reduce the risk of serious bodily injury,
NOT use power tools to assemble the blades. If screws are
overtightened, blades may crack and break.
Time Saver: Washers for blade screws can be set on each
blade screw prior to installing blades.
Locate 9 blade attachment screws and washers in
hardware pack. Slide blade through one of the narrow,
rectangular openings on motor housing, aligning holes in
blade with holes in blade arm (located on the underside
of the motor housing)--refer to drawing at right. [Be sure
to note label on blade indicating THIS SIDE UP.] Insert 3
blade attachment screws (along with washers) with
fingers first and then tighten screws securely with a
Phillips screwdriver. Repeat procedure for each remaining
blades.
Note: Tighten blade attachment screws twice a year.
10. Light Kit Assembly (Optional).
Remove 1 screw from motor plate on underside
of motor housing and partially loosen the other 2
screws.
Connect WHITE wire from motor housing to
WHITE wire from LED light kit. Connect BLACK
(or BLUE) wire from motor housing to BLACK
wire from LED light kit. Be sure molex connections
snap together securely.
Carefully arrange wiring within LED light kit. Align
slotted holes in LED light kit with loosened screws
in motor plate. Twist LED light kit to lock.
Re-insert screw that was previously removed and
tighten all 3 screws securely.
Locate slots on shade and align with nodules on
inside of LED ligt kit.
Gently push up on shade
and turn
to the RIGHT (clockwise)
completely into place.
If you do NOT wish to use the light kit,
slots on metal cover and align with nodules on
inside of LED light kit. Gently push up on metal
cover and turn to the
RIGHT (clockwise)
slides completely into place.
WARNING: Metal cover will be HOT if light is left
on.
DO
until it slides
locate
until it
page 9
blade
arm
nodule
slots
shade
nodule
slots
metal cover
motor
housing
blade
blade attachment
screws and washers
motor housing
motor plate
molex connections
LED light kit
LED light kit
LED light kit
Publicité
