Electrolux EUF20230W Notice D'utilisation page 20

20 electrolux
• Refit the door.
• Make sure the edge of the door is parallel
with the edge of the top.
• Unscrew the pin (A) and screw it on the
opposite side.
• Remove the cap (B) and position it on the
opposite side.
• Screw the lower hinges.
ENVIRONMENTAL CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
All manuals and user guides at all-guides.com
• Refit the plinth.
• Stand the appliance upright.
• Fit the handle on the opposite side and
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
A
the cabinet. In that case, wait for the natural
fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
B
Sales Service specialist will carry out the re-
versibility of the doors at your cost.
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
put the plastic caps (contained in the in-
structions bag) in the free holes.