Publicité
9. Maintenance and Cleaning
▪ Always first unplug the mini drill and milling machine before cleaning or
maintaining the machine.
▪ In case of excessive sparking, have the carbon brushes checked by a
qualified electrician. Important! The carbon brushes should not be
replaced by anyone but a qualified electrician.
▪ Use a brush or similar to clean the ventilation slots.
▪ Use a dry or slightly moist cloth to clean the housing. Do not use
aggressive chemicals such as bleach or solvents such as benzine to clean
the machine.
▪ Never immerse the unit in water!
▪ Store the mini drill and milling machine in a dry location and protect it
from dust and dirt. Store the device out of reach of children.
Technical Data
Nominal Voltage
Nominal Power
No-Load Speed
Weight
Dimensions
Protection Class
Sound Pressure Level*
Uncertainty
Sound Power Level*
Uncertainty
Hand Arm Vibration*
Uncertainty
* Sound and vibration emissions may differ from the declared values during use depending on the
ways in which the tool is used.
230 V~ 50 Hz
135 W
10000 – 32000 min
Approx. 660 g
Approx. 250 x 50 x 70 mm
II
L
= 75,7 dB(A)
pA
K
= 3 dB
pA
L
= 86,7 dB(A)
WA
K
= 3 dB
WA
2
1,732 m/s
2
K = 1,5 m/s
17
-1
Publicité
