Publicité
Please note the included General Safety Notes and
the following safety notes to avoid malfunctions,
damages or physical injuries:
▪ Dispose of used packaging material carefully or store it
out of the reach of children. There is a danger of
suffocation!
▪ Make sure the voltage corresponds to the type label on the unit.
▪ Persons with limited physical, sensorial or mental abilities are not
allowed to use the unit, unless they are supervised and briefed for
their safety by a qualified person.
▪ Disconnect the machine from the power supply before inserting the
tool, cleaning or servicing it.
▪ Do not use grinding discs with a diameter larger than 25.1 mm!
▪ Do not force the tool.
▪ Use clamps or a vice to hold the workpiece.
▪ The use of any accessory or attachment other than those
recommended in this instruction manual may present a risk of
personal injury.
▪ Do not touch the rotating chuck and the tool bit in it, as this may
cause cuts or burns.
▪ Always hold the drill and milling machine firmly in your hand. The
tool bit can suddenly get stuck, which may cause injuries.
▪ During operation always wear safety
goggles and if necessary ear protectors and
a face mask, depending on the used
material.
▪ Keep the drill and milling machine out of reach of children. The
machine is not a toy.
▪ Do not press the locking button while the machine is running!
SAFETY NOTES
12
Publicité
