Publicité
INSTALLATION
Rolls Assembly
1 - Place the radiator upside
down.
4 - Thread the threaded part
Connection
• This device is mobile type and can be moved while respecting the
safety instructions.
• Place the radiator on a dry, stable and clean surface.
• A minimum distance of 1m must be provided between the walls of the
appliance and any obstacle (furniture or walls for example) to allow
good air circulation.
• INDOOR USE ONLY
• The appliance is double insulated and must not be earthed.
• Connect the plug to a 220-240V 50-60Hz wall socket
• Unplug the appliance when it is not in operation
• A reel allows the cable to be stored safely
Important !
• Make sure to unwind the cable completely before plugging it in.
• Never handle the radiator while holding it by the reel
2 - Insert the U type screw.
5 - Tighten using the wing nut
3 - Place the plate on the hook of
the screw
6 - Proceed in the same way for
the other plate
220-240V 50-60Hz
EN
69
Publicité
