MrCool DIY Serie Manuel D'utilisateur page 11

• Sleep Operation
The SLEEP function is used to decrease energy
use while you sleep.This function can only be
activated via remote control.
Press the SLEEP button when you are ready to
go to sleep. When in COOL mode, the unit will
increase the temperature by 1°C (2°F) after 1
hour, and will increase an additional 1°C (2°F)
after another hour. When in HEAT mode, the unit
will decrease the temperature by 1°C (2°F) after
1 hour, and will decrease an additional 1°C (2°F)
after another hour.
It will hold the new temperature for 7 hours, then
the unit will turn off automatically.
Note: The SLEEP function is not available in
FAN or DRY mode.
Set
temperature
All manuals and user guides at all-guides.com
SLEEP Operation
+/- 1 C/2 F
+/- 1 C/2 F
1hr
1hr
Saving energy during sleep
Fig. 3.1
7 hours
Page 10