Symbols And Meanings - Imer Group MASTER 6010 DXL15 YN DE Manuel D'utilisation

1. SYMBOLS AND MEANINGS

In accordance with the ISO standard, the specified symbols as shown in the following table are used
for the products and this instruction manual.
ON (Switch Engine)
OFF (Switch Engine)
Alternating current
Direct current
Plus : positive polarity
Minus : negative polarity
STOP-position of a bistable push control
ON-position of a bistable push control
Protective earth (ground)
Fuse
Engine oil
Add oil
Battery charging condition
Choke (cold starting aid)
Read the operator's
instruction manual.
Stay clear of the hot surface.
Exhaust gas is poisonous.
Do not operate in an
unventilated room.
Stop the engine before
refueling.
Fire, naked flame and
smoking prohibited.
Caution, risk of electric shock.
Do not connect the generator
to the commercial power
lines.
Engine start (Electric start)
Engine stop (Electric start)
Fuel
Fast
Slow
P r
Rated power (kW)
ƒ r
Rated frequency (Hz)
Maximum site altitude above
H max
sea-level (m)
COP
Continuous power (kW)
U r Rated voltage (V)
T max
Maximum ambient temperature (°C)
COS ϕ Rated power factor
I r
Rated current (A)
m
Mass (kg)
EN
FR
ES
IT
RO
5