Reverse Sewing/Removing The Work/ Cutting The Thread; Removing The Work; Cutting The Thread - Singer 4443 Manuel D'instruction

EN
Reverse Sewing
To secure the beginning and the end of a seam, press down
the reverse sewing lever (A). Sew a few reverse stitches.
A
Release the lever and the machine will sew forward again. (1)

Removing the Work

Turn the handwheel toward you (counterclockwise) to bring
the thread take up lever to its highest position, raise the
1 2
presser foot and remove work behind the needle and presser
foot. (2)

Cutting the Thread

B
Pull the threads under and behind the presser foot. Guide
the threads to the side of the face plate and into thread cutter
(B). Pull threads down to cut. (3)
3
32