Stiebel Eltron WPE Installation page 12

CoNTENTs | INsTALLATIoN
General information
INSTALLATION
1. General information ������������������������ 12
1.1 Relevant documents ������������������������� 12
1.2 safety instructions �������������������������� 12
1.3 other symbols in this documentation ����������� 12
1.4 Units of measurement ����������������������� 12
2. Safety ������������������������������������ 12
2.1 Intended use ������������������������������� 12
2.2 General safety instructions �������������������� 13
2.3 Instructions, standards and regulations ��������� 13
2.4 Test symbols ������������������������������� 13
3. Appliance description ����������������������� 13
3.1 standard delivery ��������������������������� 13
3.2 Accessories �������������������������������� 13
4. Installation �������������������������������� 13
4.1 Minimum clearances ������������������������� 13
4.2 Installation location ������������������������� 13
4.3 Preparations ������������������������������� 14
4.4 Wall mounting ������������������������������ 14
5. Electrical connection ������������������������ 14
5.1 Appliance connection ������������������������ 15
5.2 Connecting to the heat pump manager ��������� 15
5.3 Terminal assignment ������������������������� 16
5.4 sensor installation ��������������������������� 18
6. Closing the front fascia ���������������������� 18
7. Commissioning ���������������������������� 18
8. Troubleshooting ��������������������������� 19
9. Specification ������������������������������� 19
9.1 Details on energy consumption ���������������� 19
9.2 Data table ��������������������������������� 19
GUARANTEE
ENVIRONMENT AND RECYCLING
1. General information
This document is intended for qualified contractors.
Note
Read these instructions carefully before using the ap-
pliance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1 Relevant documents
WPM operating instructions
WPM commissioning instructions
WPM installation instructions
12 |
All manuals and user guides at all-guides.com
1.2 Safety instructions
1.2.1 Structure of safety instructions
1.2.2 Symbols, type of risk
Symbol
1.2.3 Keywords
KEYWORD
DANGER
WARNING
CAUTIoN
1.3 Other symbols in this documentation
Symbol
f This symbol indicates that you have to do something. The
f
1.4 Units of measurement
2. Safety
only a qualified contractor should carry out installation, com-
missioning, maintenance and repair of the appliance.
2.1
The appliance is intended for domestic use. It can be used safe-
ly by untrained persons. The appliance can also be used in a
KEYWORD Type of risk
Here, possible consequences are listed that may re-
sult from failure to observe the safety instructions.
f Steps to prevent the risk are listed.
f
Type of risk
Injury
Electrocution
Meaning
Failure to observe this information will result in serious
injury or death.
Failure to observe this information may result in serious
injury or death.
Failure to observe this information may result in non-se-
rious or minor injury.
Note
General information is identified by the adjacent sym-
bol.
f Read these texts carefully.
f
Meaning
Material losses
(appliance damage, consequential losses and environ-
mental pollution)
Appliance disposal
action you need to take is described step by step.
Note
All measurements are given in mm unless stated oth-
erwise.
Intended use
WPE