PawHut D00-144 Mode D'emploi page 5

EN
INSTALLING AND REMOVING WHEELS
Place the wheel hub on the axle by simply pushing in the wheel until it snaps in
place, so the wheel cannot be removed. Push in all the way so that the wheel
cannot be pushed further. After both wheels are assembled/attached pull on the
wheels to ensure they cannot be removed.
To remove the wheels, lift back of trailer up and simply push on the push buttons
located on the axle and remove the wheels.
NOTE: Check tire sidewall for proper tires inflation and check tires regularly.
PARKING THE TRAILER
To park the trailer, use the parking straps screwed under the rear bottom.
Wrap the strap around the wheel rim and snap the hook on the D-ring.
To run the trailer, unhook the strap .
FLAG
Insert the flagpole into the flagpole pocket at the left rear corner of the side panel.