Samsung HW-J470 Manuel D'utilisation page 23

USB
You can play music files located on USB storage devices through the Soundbar.
USB port
1.● Connect the USB device to the USB port on the
back of the product.
2.● Press the ( ) button on the main unit's top panel
or the (SOURCE) button on the remote control
to select the USB mode.
3.● USB appears on the display screen.
• The Soundbar connection to the USB device is
complete.
• The Soundbar automatically turns off (Auto
Power Off) if no USB device has been connected
for more than 25 minutes.
+ Before you connect a USB device
Be aware of the following:
● If the file name of a file or folder on a USB device
exceeds 10 characters, it is not displayed on the
Soundbar's display.
● This product may not be compatible with certain
types of USB storage media.
● The Soundbar supports the FAT16 and FAT32 file
systems.
- The NTFS file system is not supported.
● Connect USB devices directly to the USB port of the
product. Otherwise, you may encounter a USB
compatibility problem.
● Do not connect multiple storage devices to the
product via a multi-card reader. It may not operate
properly.
● Digital camera PTP protocols are not supported.
● Do not remove the USB device while it is
files.
● DRM-protected music files (MP3, WMA) from
commercial web sites cannot be played.
● External HDDs are not supported.
● Mobile phone devices are not supported.
● File Format Type Compatibility list:
Format Codec
MPEG 1 Layer2
MPEG 1 Layer3
*.mp3
MPEG 2 Layer3
MPEG 2.5
Layer3
Wave_Format_
MSAudio1
*.wma
Wave_Format_
MSAudio2
AAC
AAC-LC
*.aac
HE-AAC
*.wav
-
*.ogg
OGG 1.1.0
FLAC 1.1.0,
*.flac
FLAC 1.2.1
23
FUNCTIONS
Display
transferring
Sampling
Bitrate
Rate
80kbps~320kbps
16KHz ~
48KHz
56kbps~128kbps
48kbps~320kbps
16KHz ~
96KHz
128kbps~192kbps
24KHz ~
48kbps~64kbps
96KHz
up to 3000kbps
16KHz ~
48KHz
50kbps~500kbps
16KHz ~
up to 3000kbps
96KHz