Télécharger Imprimer la page

Midland XTC300 Guide De Démarrage Rapide page 7

Publicité

Les langues disponibles

Les langues disponibles

Tips and Tricks
Problem
Batteries
Camera not turning on
Make sure battery is fully charged.
Recording
Make sure the switch is pushed all the
Camera not recording
Verify available memory.
Micro SD card
Ensure the Micro SD card is inserted
Micro SD card not reading
Plug camera into the computer to
Attempt formatting process.
Video Playback
Verify the camera is plugged into a
Remove other unused USB devices.
Transfer video to computer before
Slow or choppy video
Verify computer meets minimum
Verify proper codec is installed.
6
All manuals and user guides at all-guides.com
Solution
way forward. If the record LED does
not come on, turn off the device and
reinstall the battery.
properly.
verify it has available storage.
USB 2.0 device.
viewing.
requirements.
www.midxtc.com
Tips and Tricks
Problem
Video Downloading
Verify the camera is plugged into a USB
2.0 device. If registering as 1.1, unplug
Slow data transfer
and the re-plug the device.
Remove other unused USB devices.
Ensure record switch is in the record
position while connected to computer.
Computer does not
Ensure the Micro SD card is inserted
recognize camera
properly.
Micro SD card may be corrupted.
Attempt formatting process.
Using Windows, run Check Disk
File won't transfer off
In the run command type:
memory card
chkdsk volume:/f
then press enter
Sound
Place piece of tape over microphone
hole.
Excessive Wind Noise
Try using the submersible case
Solution

Publicité

loading

Ce manuel est également adapté pour:

Xtc300vp4