Transport Position, Handlebar - Husqvarna 536LiRX Manuel D'utilisation

Spreading the load on your shoulders
A well-adjusted harness and machine makes work much
easier. Adjust the harness for the best working position.
Tension the side straps so that the weight is evenly
distributed across both shoulders.
Correct height
The machine should be supported in a harness when
trimming so that the cutting equipment is parallel to the
ground.
Correct balance
Let the trimmer head balance at a comfortable cutting
height, i.e. close to the ground.
16 – English
ASSEMBLY

Transport position, handlebar

• The handlebar can easily be turned to fit along the
shaft for easier transportation and storage.
• Loosen the knob. Turn the handle clockwise so that
the throttle handle touches the battery.
• Now twist the handlebar around the shaft. Tighten the
knob.
Li-ion Li-ion