Electrolux FR53G Notice D'utilisation page 10

6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 How to set: Heating function
Step 1 Turn the knob for the heating functions
to select a heating function.
Step 2 Turn the control knob to select the tem‐
perature.
Step 3 When the cooking ends, turn the knobs
to the off position to turn off the oven.
6.2 Heating functions
Heating Application
function
The oven is off.
Off position
To roast or roast and bake food with
the same cooking temperature on
more than one shelf position, without
Fan Cooking
flavour transference.
This function is designed to save en‐
ergy during cooking. When you use
this function, the temperature in the
Moist Fan Bak‐
cavity may differ from the set tem‐
ing
perature. The heating power may be
reduced. For more information refer
to "Daily Use" chapter, Notes on:
Moist Fan Baking.
7. CLOCK FUNCTIONS
7.1 How to set: End of Cooking
To set the switch-off time for oven functions.
Step 1 Set the oven function and the temperature.
Step 2 Turn the knob for the timer to its full range.
Step 3 Turn the knob for the timer to set the switch-off time.
When the set time ends, the signal sounds and the oven turns off.
10 ENGLISH
Heating Application
function
To bake and roast food on one shelf
position.
Refer to "Care and cleaning" chapter
Conventional
for more information about: Aqua
Cooking /
Clean.
Aqua Clean
To grill thin pieces of food in large
quantities and to toast bread.
Fast Grilling
To bake pizza. To make intensive
browning and a crispy bottom. Set
the temperature 230°C.
Pizza Function
6.3 Notes on: Moist Fan Baking
This function was used to comply with the
energy efficiency class and ecodesign
requirements (according to EU 65/2014 and
EU 66/2014). Tests according to:
IEC/EN 60350-1
The oven door should be closed during
cooking so that the function is not interrupted
and the oven operates with the highest
energy efficiency possible.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. For
general energy saving recommendations
refer to "Energy Efficiency" chapter, Energy
Saving.