Daily Operations-Playback - JVC UX-G50 Manuel D'instructions

Numeric
buttons
MP3 MODE
4/1,
7, ¡ /¢
Disc selection
buttons
1 STANDBY/ON
2
3
VOLUME
4
9
Daily Operations
1
SET/
RESUME
PRESET UP,
PRESET DOWN
2
QP LINK
FM MODE
DIMMER
3
—Playback
1
Turn on the power.
The STANDBY lamp on the main unit turns off.
• Without pressing STANDBY/ON
turns on by pressing one of the source selecting
buttons in the next step.
2
Select the source.
Playback automatically starts if the selected source is
ready to start.
• If you press AUX or USB, start playback source on
the external component.
3
Adjust the volume.
4
Operate the target source as explained
later.
To turn off (stand by) the System
The STANDBY lamp on the main unit
STANDBY/ON
lights up.
• A small amount of power is always
consumed even while on standby.
To turn off the clock indication to
save the power
While the System is turned off...
• Press the button again, to display the
DIMMER
clock indication.
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (stand by) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
, the System
Remote
ONLY