AKASO EK7000 Manuel De L'utilisateur page 7

4. Photo Resolution: 20M/16M/14M/12M/8M/5M
Default setting is 20M.
5. Time Lapse: Off/2S/3S/5S/10S/20S/30S/60S
Default setting is 2S.
Time Lapse Photo captures a series of photos at specified intervals. Use this mode to
capture photos of any activity, then choose the best ones later.
6. Continuous Lapse: Off/2S/3S/5S/10S/20S/30S/60S
Default setting is Off.
Turn on Continuous Lapse, this camera takes continuous lapse photos.
7. Burst Photo: OFF, 3P/S
Default setting is off.
Burst captures up to 3 photos in 1 second, so it is perfect for capturing fast-moving activities.
8. Exposure: -3, -2, -1, 0, 1, 2, 3
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate exposure level.
However, Exposure lets you select an area that you want the camera to prioritize when
determining exposure. This setting is particularly useful in shots where an important region
might otherwise be over- or underexposed.
When you change this setting, the LCD display immediately shows you the effect on your
image. If you change modes, the camera returns to using the entire scene to determine
the correct level of exposure.
09
9. White Balance: Auto, Sunny, Cloudy, Incandescent Light, Fluorescent Light
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to optimize for
cool or warm lighting conditions. When you change this setting, the LCD display
immediately shows you the effect on your image.
10. Upside Down: Off / On
Default setting is Off.
This setting determines the orientation of your video or photos to help you prevent upside
down footage.The user interface will be upside-down when Upside Down is enabled.
11. Power Frequency: Auto, 50Hz, 60Hz
Default setting is Auto.
12. Screensaver: Off / 1 minute / 3 Minutes / 5 Minutes
Default setting is 1 Minute.
Turns off the LCD display after a period of inactivity to save battery life. To turn on the LCD
display again, press any button on the camera.
13. Auto Shutdown: Off / 1 Minute / 3 Minutes / 5 Minutes
Default setting is 3 Minutes.
Powers off your EK7000 after a period of inactivity to save battery life.
14. Date Stamp: Off / On
Default setting is on.
If you turn on Date Stamp, this camera adds date stamp to the videos or photos you take.
10