Honeywell Home HE360 Notice D'installation page 5

FEED TUBE NOZZLE
WATER
DISTRIBUTION TRAY
HUMIDIFIER
PAD ASSEMBLY
THUMB
SCREW
7. Position the securing clips as shown in Fig. 4.
8. Make sure the humidifier housing is level, then position it in the opening so the plastic tabs are in place on
the lower sheet metal edge of the opening. Use pliers, as necessary, to flatten cut edges. See Fig. 5.
9. Push in securing clips until completely seated.
10. Drill holes and install the three sheet metal screws on the top of the humidifier housing. Secure the
housing with the three remaining screws.
Fig. 3. Disassembling humidifier.
TOP VIEW – HUMIDIFIER HOUSING
CLIP
Fig. 4. Position securing clips.
COVER
ASSEMBLY
CLIP
5
HE360 HUMIDIFIER
HUMIDIFIER
HOUSING
M12809A
M12813B
69-2629EF—11